All parts are bench tested and quality checked for functionality.

Genuine Numatic Henry PCB Printed Circuit Board 4 Wire

Red Board as in stock Photo

4 wire connector type.

Please see wiring diagram so fitting is made easier. Older versions of the board may be wired differently.

Please see the enclosed wiring diagram to ensure that each of the 4 pins is wires to the correct part.

Fits Models below.

• Harry HVR200A
• Hetty HET200A
• Henry HVR200A
• James JVP180A
• Henry Xtra  HVX200A
• NRV200
• PSP180A
• PSP200A
• NSP180A
• NSP200A
• NVP180
• NVP200
• NSR200A
• PPR200A
• PVT220A
• PPT220A
• NST220
• NQS 250B

The Henry Circuit Board is sadly fairly common for failing, as a result you be get a loss of power or strange behavior when changing from hi to low settings. This is because a component has failed on the circuit board. Sometimes you can visually see this, but not always, We always recommend checking all power supply and motor parts on your Henry when diagnosing a power loss issues.

The post Genuine Numatic Henry PCB Printed Circuit Board 4 Wire / Tag appeared first on Vacs R Us vacuum repair.

Full working order

Very good suction

Includes 

Refurbished used Main unit

Brand New Hose / Wand and Floor tool as pictured

Brand New Filter

90 Day “Return to Base” Guarantee

(Please Note, That  “Henry Vacuum cleaners” are not a Bag-less Vacuum cleaner and should NOT be used without a bag. Any Guarantee period stated will be void if a Bag is not used)

Extended 1 year warranty available at checkout

Good condition, it’s been fully stripped down, checked & fully cleaned inside and out, fully serviced ready to use,

The post **REFURBISHED** Numatic Henry Hoover Vacuum Cleaner appeared first on Vacs R Us vacuum repair.

Full working order

Includes 

Refurbished used Main unit

Brand new Floor tool / Hose and wand

Brand New Filter

90 Day “Return to Base” Guarantee

(Please Note, That  “Henry Vacuum cleaners” are not a Bag-less Vacuum cleaner and should NOT be used without a bag. Any Guarantee period stated will be void if a Bag is not used)

Extended 1 year warranty available at checkout

Good condition, it’s been fully stripped down, checked & fully cleaned inside and out, fully serviced ready to use,

The post **REFURBISHED** Numatic Hetty Hoover Vacuum Cleaner appeared first on Vacs R Us vacuum repair.

Full working order

Very good suction

Includes

Refurbished used Main unit

Brand New Floor tool , Hose and wand as pictured

Brand New Filter

90 Day “Return to Base” Guarantee

(Please Note, That  “Henry Vacuum cleaners” are not a Bag-less Vacuum cleaner and should NOT be used without a bag. Any Guarantee period stated will be void if a Bag is not used)

Extended 1 year warranty available at checkout

Good condition, it’s been fully stripped down, checked & fully cleaned inside and out, fully serviced ready to use,

The post *REFURBISHED* Numatic Henry Hoover Vacuum Cleaner appeared first on Vacs R Us vacuum repair.

The post Numatic Henry Hetty Basil Hoover Vacuum Cleaner 32mm Accessory Tool Kit appeared first on Vacs R Us vacuum repair.

• 1200w 240v
• Replaces 5471
• Toothed pulley (22)
• Vacuum / Suction motor

Fits a range of upright machines including the X1.1, X4, X5, X7 ranges. This motor will also fit the X1, but the pulley its self may need changing for your old one as well as Taski Ensign machines, SM2, XP2, XP10, X4 Extra, X4 Pet and many others.

REPLACEMENT MOTOR FOR SEBO YOU WILL NEED THE ELECTRICAL LEADS OFF YOUR OLD MOTOR

The post REPLACEMENT MOTOR FOR Sebo X1.1, X4, X5 and X7 models appeared first on Vacs R Us vacuum repair.

This is the early type Sebo PCB marked NPPSTXSM-2.

This is a tested and recycled main board (also sometimes known as a PCB) for the Sebo vacuum cleaners listed below. This is the unit that encompasses the warning lights on your Sebo. However, it is not the only component that controls these functions, and it has other functions too. Please be sure that this is the item you need before order.

Technical note: Main PCBs are only interchangeable between different types if the side power PCB is changed at the same time, as the PCBs work with each other so you cannot mix and match.

This PCB can be used to replace like with like on the following Sebo models:

• Sebo X1
• Sebo X1.1
• Sebo X4 (not Pet models with “Boost” button)
• Sebo X5

The post Sebo X1 X1.1 X4 X5 Main PCB Board Early Type appeared first on Vacs R Us vacuum repair.

This is a used / checked and fully functional servo motor (also sometimes known as a gearbox) for the Sebo vacuum cleaners listed below. This is the unit that a wheel locates on the spindle on the underside of your Sebo. It is the unit that controls the automatic height adjustment on your Sebo. However, it is not the only component that does this (the main PCB board and other components contribute to this also), so please be sure that this is the item you need before order.

This is a replacement servo motor to fit all versions of the following Sebo models:

• Sebo X1
• Sebo X1.1
• Sebo X4
• Sebo X5
• Sebo X7
• Sebo X8
• Sebo XP10/20/30

The post Sebo X1 X1.1 X4 X5 X7 Servo Motor / Gear Box appeared first on Vacs R Us vacuum repair.

Numatic Fishtail Extraction Tube 275mm

GENUINE NUMATIC 275mm SEE-THRU CARPET & RUG FISHTAIL SUCTION HEAD 601126

• Genuine/Original Numatic 275mm See-Thru Carpet Cleaning Suction Fishtail Head
• Fits Numatic Models like George, CT 370, CT 470, CTD 570, CTD 900 etc.
• Includes Tube Securing Screw
• Direct from Numatic – Quality Assured.
• Heavy Duty ALUMINIUM version also available in our other listings

The post GENUINE NUMATIC GEORGE CT370 CARPET CLEANER FISHTAIL PLASTIC SUCTION HEAD 601126 appeared first on Vacs R Us vacuum repair.

The post Numatic George CT 370 380 GVE370 Solution Detergent Chemical Tank Container appeared first on Vacs R Us vacuum repair.